NPN PNP Electronic IC Chip Transistor Adjustable Texas Instruments TI TPS54526RSAR

Features for the TPS54526

• D-CAP2™ mode enables fast transient response
• Low output ripple and allows ceramic output capacitor
• Wide VIN input voltage range: 4.5 V to 18 V
• Output voltage range: 0.76 V to 5.5 V
• Highly efficient integrated FETs optimized for lower duty cycle applications – 63 mΩ (high side) and 33 mΩ (low side)
• High efficiency, less than 10 µA at shutdown
• High initial bandgap reference accuracy
• Adjustable soft start
• Pre-biased soft start
• 650-kHz switching frequency (fSW)
• Cycle-by-cycle over current limit
• Power good output
• Auto-skip Eco-mode™ for high efficiency at light load

Description for the TPS54526

The TPS54526 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54526 enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, low standby current solution. The main control loop for the TPS54526 uses the D-CAP2™ mode control which provides a very fast transient response with no external compensation components. The adaptive on-time control supports seamless transition between PWM mode at higher load conditions and Eco-mode™ operation at light loads. Eco-mode™ allows the TPS54526 to maintain high efficiency during lighter load conditions. The TPS54526 also has a proprietary circuit that enables the device to adopt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP, SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 4.5-V to 18-V VIN input. The output voltage can be programmed between 0.76V and 5.5V. The device also features an adjustable soft start time and a power good function. The TPS54526 is available in the 14-pin HTSSOP package and the 16 pin QFN package, designed to operate from –40°C to 85°C.